How to Fix Decoder Boot Problem

If your decoder powers on but freezes on the word BOOT, this usually indicates a software or power-related issue.

Shutdown During Update or Power Cut

If the issue began after:

• A power outage
• An interrupted software update

Then the device likely needs flash recovery (software reinstallation).

1. Manual Flash Recovery Procedure

What You Need

• A USB Flash Drive
• The correct software for your decoder

Steps

1. Copy the software update file to the USB flash drive.
2. Make six duplicates of the same file and rename them as follows:

3. Insert the USB drive into the decoder.
4. Disconnect power, then plug it in again. The device should detect the update and begin installation automatically.

2. Special Instructions by Device Type

For ALI-Based Devices

• Insert the USB stick.
• Disconnect power, then reconnect.
• Press and hold the power button on the decoder itself.
• When the countdown appears, release the button.
• Flashing should begin automatically.

For GX-Based Devices

• Insert the USB stick.
• Disconnect and reconnect power.
• Keep pressing the power button repeatedly.
• If the device has no physical button, press the power button on the remote.
• Flashing should begin automatically.

3. Example Video

If you want a visual guide, check this example for the MS 2727 model: Watch Tutorial Video